CB943FA is SATA to mini PCI-e (PATA Interface) adapter, providing a standard 7 + 15 pin SATA Connector to HOST system and a 52pin mini PCI-e connector for mSATA SSD device. After assembled, it can run in variety of operating system. such as DOS, Windows 95, 98, XP, 2000, Vista, Win 7, Linux, Unix, and so on.

CB943FA allows mini PCI-e PATA SSD as a system disk to boot OS directly, no request the H/W driver installation.

CB943FA doesn't affect the execution speed of SSD storage device.

1. Full complaint with SATA revision 2.6

2. 3.3 Volt and 1.8 Volt power system

3. Support ATA / ATAPI-7 specification

4. ATA / ATAPI-7 Ultra DMA Mode 0,1,2,3,4

5. 3.3 Volt mini PCI-e SSD support

6. Mini PCI-e 52-pin Connector

7. Support following form factor of mini PCI-e SSD dimension :

※ Serial ATA Reversion 2.6---------------------------------------------------------------------------->February 2007

※ ATA/ATAPI-7---------------------------------------------------------------------------------------------->April 2004

※ PCI Express Mini Card Electromechanical Specification 1.2------------------------------->October 26, 2007

The adapter connects to the Host PC in the same way that a 2.5 SFF SSD drive is connected using a SATA cable. It may be used in any application where a SFF SSD drive may be used:

1. desk-top PC            

2. Internet Appliances

3. Kiosks               

4. Industrial Computers

5. Routers              

6. Firewalls

Support Storage Device :

※ Intel Z-P230 with Mini PCIe Form Factor SSD and compatible Mini PCI-e Storage(PATA Interface)

The following is adapter CB943FA Series brand support :

Detailed Support List Download :

CB943FA Series Support mini PCI-e (PATA Interface) List

Datasheet Download :

    CB943FA .PDF

          

    CB943FA (繁體中文).PDF

    CB943FA (简体中文).PDF

          

Test report Download :

     Performance & Burn in test .PDF

    效能及老化測試(繁體中文).PDF

    效能及老化测试(简体中文).PDF

Back